Kentix MultiSensor-RACK Manual de Serviço descarregar pdf (Página 29)

Sensor-Vibration

Alarm settings for the sensitivity of the internal vibration sensor. The sensitivity can be adjusted in 3 levels.

If necessary the vibration sensor can also be completely turned of.

Arm-Disarm time

Switching time for the time-controlled arming and disarming from the integrated motion detection.

To use it, a time server (NTP) must be set in the network settings.

Ext. alarm input 1/2

The MultiSensor has two configureable alarm inputs. At this alarm inputs external signaling devices can be

plugged (e.g leakage sensors, door contacts or malfunction messages from external devices). The trigger is

set by a potential free contact (opener). The trigger logic can be set to HI or LOW.

Ext. alarm output

Label for the switching output (output 2). With this output external devices or signals can be switched. It is

controlled via SNMP, the Web-Interface or the Kentix-App. Pay attention to the electrical connection

conditions in the manuals.

Alarm buzzer time

Time in seconds how long the internal buzzer will sound after an alarm.

Alarm relay time

Time in seconds, how long the open collector output is set when an alarm is triggered. You can trigger with

this output e.g. relays. Pay attention to the electrical connection conditions in the manuals.

Re-arming time

Set the time, when the sensor motion detection has to rearm, after a motion alarm is triggered.

The red alarm LED will be turned off after that time.

Alarm repeat

Set the time, when a triggered alarm shall be triggered.

The alarm will be sent to the entered e-mail-addresses until all values are in normal range again.

A value of 0 sets the alarm repeating to inactive.

Users

User accounts

You can set up to 5 user accounts with individual passwords. With the first user it is also possible to access

the integrated FTP server. For the e-mail alerting, enter the addresses of the recipients.

NOTE!

The vibration sensor in the MultiSensor is first available in devices delivered in 01/2014 or later.

Page 29 ! ! ! ! (08-2014, subject to change) kentix.de

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 70 71

Sem comentários

Kentix MultiSensor-RACK Manual de Serviço Página 29